The Lagmaster Plus™ is the electrician's pole tool. The unique plug-in heads make it the most efficient tool of it's kind. It increases safety by keeping your men on the floor. Use it to install ceiling wire, jack chain, threaded rod, smooth rod and overhead screw installation. Power the pole with any 3/8" or 1/2" battery operated or 273 I TOOLS, DRILLS AND ACCESSORIES LAGMASTER PLUS™ www.metallicsonline.com corded drill. One pole…many applications! Choose from two (2) different adjustable length models. • MLMTA Triple 4' (18' ceilings) • MLMT6 Triple 6' (24' ceilings) Hang it up. (wire plug) Lagmaster Plus™ wire plug hangs 12 or 9 guage wire. No need for ladders, scaffolding or scissor lifts. Pre-wrapped wire on eye lags require a special plug (pre-wrapped plug). Hang Wire. Move ring into the up position with set screw Insert the eye lag screw into secured wire plug. Insert the wire through the hole and bend the tails down. Adjust the pole to length and rotate the screw until it is seated. Pull down on the pole so that the wire is caught on the ring. Rotate the pole again to twist the wire. Pull the wire through the plug to complete the installation. Secure a #1 1/2 "S" hook to an acoustical eye lag and to the proper size chain for your job. Insert it into the Lagmaster Plus™. Secure the chain in the magazine so it does not whip when rotating the pole. Now rotate the eye lag screw until it is seated. Lower the Lagmaster Plus™.
Metallics Distributor Catalog 2014
To see the actual publication please follow the link above