Page 167

Metallics Distributor Catalog 2014

E ANCHORING DEVICES tie wire wedge anchor Zinc with Stainles Steel Clip For various overhead suspension applications STOCK NO. UPC NO. DIAMETER/ LENGTH MIN. LENGTH IN DEPTH WT. PER PKG. STD. PKG. hamer drive wedge anchor Zinc and Stainles Steel A superior alternative to traditional wedge anchors • Installs six times faster than an ordinary wedge-type anchor. • Easily installs through pre-drilled holes in plates and footings – no need for templates. • No special tools required. • Tensions during setting process. • Deforms the concrete to set, eliminating creep and loss of pre-load. • Faster, easier and more consistent installation. INSTALLATION: 1. Drill hole. 2. Preset nut and washer for desired embedment. 3. Hammer center pin until it is aligned with top of the bolt. 4. Anchor is set. Safety glasses should be worn for any driving applications. See our line of Safety Glasses, pages 301, 302 and 303 168 www.metallicsonline.com SUGGESTED TRADE LIST PRICE PER JTWA214 80906 1/4 x 23/16 13/8 3.45 100 108.60/c other sizes and quantities available by request STOCK NO. UPC NO. SIZE THREAD LENGTH MASONRY DRILL SIZE WT. PER PKG. STD. PKG. SUGGESTED TRADE LIST PRICE PER ZINC CHROMATE JHW14134 80907 1/4 x 13/4 5/8 1/4 x 4 1.72 50 112.46/c JHW14238 80908 1/4 x 23/8 3/4 1/4 x 4 2.05 50 119.20/c JHW5162 80909 5/16 x 2 3/4 5/16 x 4 2.70 50 146.00/c JHW516234 80910 5/16 x 23/4 1 5/16 x 4 3.04 50 169.60/c JHW38238 80911 3/8 x 23/8 1 3/8 x 4 4.35 50 184.60/c JHW38312 80912 3/8 x 31/2 11/8 3/8 x 6 6.05 50 256.80/c JHW38434 82630 3/8 x 43/4 11/8 3/8 x 6 7.03 50 372.66/c JHW12234 82635 1/2 x 23/4 1/2 1/2 x 4 4.80 25 305.20/c JHW12312 82640 1/2 x 31/2 1/2 1/2 x 6 5.92 25 320.92/c JHW12434 82645 1/2 x 43/4 2 1/2 x 6 7.25 25 470.00/c JHW126 82650 1/2 x 6 2 1/2 x 12 9.07 25 703.60/c JHW584 82655 5/8 x 4 15/8 5/8 x 6 10.76 25 488.52/c JHW58434 82660 5/8 x 43/4 15/8 5/8 x 6 12.22 25 676.52/c JHW586 82665 5/8 x 6 2 5/8 x 12 6.03 10 834.50/c JHW345 82670 3/4 x 5 2 3/4 x 12 7.36 10 904.80/c JHW346 82675 3/4 x 6 2 3/4 x 12 8.39 10 1,326.00/c JHW34712 82680 3/4 x 71/2 2 3/4 x 12 9.21 10 1,587.80/c Larger diameters & lengths available by special request. other sizes and quantities available by request


Metallics Distributor Catalog 2014
To see the actual publication please follow the link above