Page 165

Metallics Distributor Catalog 2014

E ANCHORING DEVICES CONTINUED SLEEVE TYPE ANCHOR * = acorn nuts Steel Zinc Chromate Sleeve anchors work under a true expansion principle, whereby the tightening of the nut forces the expansion of an outer sleeve over a tapered portion of the bolt. The sleeve also becomes a factor in a shear load application providing increased strength in addition to the anchor's bolt. The selection of the proper length of sleeve anchor depends upon the thickness of the material to be fastened and the minimum depth of anchor required in masonry for maximum holding power. Add the thickness of the material A) and the recommended depth for the anchor diameter (B) to determine the correct length of anchor to be used. (B) to determine the correct length of anchor to be used. Sleeve Anchors hold more because: Other anchors limited to small area expanded by plug Tighten here Unique sleeve increases holding power area over entire length of bolt Sleeve anchors do not depend on bottom of hole to expand the anchor 166 www.metallicsonline.com Effective length Measured length 3/8" Diameter sleeve anchor 1/2 11/4" Min. depth Total length required Min. 13/4 A B Selecting the Proper Length Sleve Anchor STOCK NO. UPC NO. DIAMETER LENGTH BOLT DIAMETER FASTENS MATERIAL UP TO DEPTH IN LENGTH WT. PER PKG. STD. PKG. SUGGESTED TRADE LIST PRICE PER STEEL ZINC CHROMATE - FLAT HEAD J2520F 77220 1/4 x 2 3/16 1 1 3.11 100 97.38/c NEW J2530F 77225 1/4 x 3 3/16 2 1 4.17 100 101.85/c NEW STEEL ZINC CHROMATE - ROUND HEAD J2512R 81089 1/4 x 11/4 3/16 1/4 1 1.89 100 63.88/c NEW J2520R 82620 1/4 x 2 3/16 1 1 2.52 100 64.88/c NEW J2526R 82626 1/4 x 23/4 3/16 1 1 3.24 100 80.75/c NEW STAINLESS STEEL 18-8 TYPE – HEX & ACORN J2513SS* 82106 1/4 x 13/8 3/16 3/8 1 2.14 100 77.53/c J2522SS* 82107 1/4 x 21/4 3/16 11/4 1 3.30 100 92.58/c J3114SS 82108 5/16 x 11/2 1/4 1/2 1 4.50 100 102.85/c J3124SS 82109 5/16 x 21/2 1/4 11/2 1 6.30 100 147.48/c J3717SS 82111 3/8 x 17/8 5/16 5/8 11/4 3.62 50 223.86/c J3730SS 82112 3/8 x 3 5/16 13/4 11/4 4.87 50 223.86/c J5022SS 82113 1/2 x 21/4 3/8 3/4 11/2 3.12 25 290.92/c J5026SS 82114 1/2 x 3 3/8 11/4 11/2 3.88 25 467.80/c J5030SS 82116 1/2 x 3 3/8 11/2 2 4.02 25 360.40/c J5040SS 82117 1/2 x 4 3/8 21/2 11/2 5.50 25 466.72/c J6230SS 82118 5/8 x 3 1/2 1/4 2 6.60 25 630.52/c J6242SS 82119 5/8 x 41/4 1/2 21/4 2 4.00 10 829.00/c J7524SS 82121 3/4 x 21/2 5/8 1/2 2 5.00 10 894.80/c J7542SS 82123 3/4 x 41/4 5/8 13/4 21/2 3.50 5 1,263.00/c J7554SS 82124 3/4 x 51/2 5/8 33/4 21/2 4.70 5 1,493.60/c Larger diameters & lengths available by special request. other sizes and quantities available by request


Metallics Distributor Catalog 2014
To see the actual publication please follow the link above